My very first time Small Form Factor PC Build
My 5th time of PC Build It is my fully upgraded system next from Whittie ROG build w/c in a half of the build including one hard drive and the others are older and it couldn't compatible with it to Helena
from the last build, it was a Western Digital 500GB Hard Drive came from the 3rd Build...
SPECS
- CPU: Intel Core i5 3570 3.8Ghz MotherBoard: Biostar H61-MGV3
- Cooler: Deepcool Gammaxx 300 Single 120mm fan
- RAM: Corsair Vengeance 4x2 8gb Kit 1866Mhz CL9(swapped with Crucial Ballistix XT 8gb kit)
- HDD: Seagate Barracuda 500gb 7200RPM Storage
- CASE: Lian Li PC-V351
- GPU: Gigabyte NVidia Geforce GTX 760 2GB Windforce 3x OC
- PSU: Cougar SL600 600W 80+ True Rated
Lian Li PC-V351 Aluminum mATX Case
As u can see, there a lot of boxes base on the specs above.
Unscrewing the case, then take out the L tray from the case.
Unbox the motherboard, and attach it to the motherboard tray, start putting the CPU into the socket.
Once CPU is placed. Install the DeepCool Gammaxx 300 CPU Cooler in with nice and secure.
Don't forget to plug the CPU cooler's fan 3pin into the CPU connector from the motherboard. Next, get the pair sticks of RAM then install it into the RAM socket with correct position.
Remove the PCI slot for your GPU dual slot.
Next is the Graphics Card: GTX 760 2GBDDR5
I also sprayed white acrylic-epoxy. At First, remove all screws of the fan shroud then, the side metal plate, I used the primer first for the metal plate. And this is how my GPU looks. It's cute.
I also added 90 GPU shroud for the beauty.
Unbox the Power supply then, and It's hard when the mobo is in.
It's very hard to plug the front headers in.
Screwing the Hard Drives on the bracket.
Installing DeepCool 120mm fans on the bracket.
And, also the CD Drive.
Once it's all connected. Put the side panels on..
Once it's all done. Make sure your ports are corrected.
Make sure you're all hardware and ports are fully corrected.
Only you need have to do is install the operating system and drivers,
